- (972) 475-2726
- Follow Us
Menu
Straight answers to the finishing questions we get asked most — process selection, MIL-spec callouts, masking, and how to write a print that gets quoted right the first time.
No news, no press releases. These are the questions buyers, engineers and quality teams actually ask us — answered properly, so you can settle them before the drawing is released instead of after the parts arrive.
Heat, film thickness, what the specification says and cost at volume — the four things that actually decide it, plus three mistakes worth avoiding.
Chemical Agent Resistant Coating is a system, not a color. How the stack is built from cleaning through topcoat, and what to settle before parts ship.
One converts the surface, one builds a thick film, one builds a very thin one. Five questions that settle which belongs on your part.
Most rejected finishing lots trace back to an unclear drawing. Which surfaces need protecting, how to mark them up, and why masking drives your piece price.
Every primer, topcoat, pretreatment and cleaning method we run — grouped by what they do, with notes on reading a callout correctly.
Our chemists and process engineers will help you pick the finish that fits the environment, the substrate and the budget — before the drawing is released. That conversation is free and it is the part of the job we enjoy.
Capabilities, certifications, industries and exactly what to send with an RFQ.
The full specification list and what certification comes with the job.
Powder, liquid, Cerakote, silk screening and the prep behind all of it.
Plating, anodizing, chem film and passivation — same company, one PO.
Send the print and the requirement. We will tell you which process fits — including when the honest answer is one we do not run.
